Design and exploration of 5-nitro-3-trinitromethyl-1H-1,2,4-triazole and its derivatives as energetic materials

Molecular Diversity - According to the fact that 5-nitro-3-trinitromethyl-1H-1,2,4 triazole (NTNMT) is a successful, good explosive, energetic groups such as –CH3, –NH2, –NHNO2,...     

Experimental comparison of nonlinear damping performance of toroidal and conventional tuned liquid column dampers

Nonlinear Dynamics - Conventional tuned liquid column dampers (TLCDs) are deficient in multidirectionality. In contrast, toroidal TLCDs are designed to extend the application to multidirectional...     

Hudson模型适用性及储层微观建模应用*

为明确裂缝间相互作用对各向异性的影响，本文以Hudson模型为例分析了裂缝密度、裂缝倾角对地震波波场、弹性常数和Thomsen系数的影响规律，然后采用“基质-骨架-流体”组合化的方法进行了裂缝储层微观尺度的建模，并与实际测井资料进行了对比。结果表明该模型适用条件为低裂缝密度储层，二阶模型适用的裂缝密度范围比一阶模型大，但在裂缝密度过大时，二阶模型会出现不收敛的现象，模型便不再适用。裂缝储层纵横波速度随裂缝倾角增大而增大，纵波速度对裂缝倾角更为敏感。另外，在与实际测井曲线对比时，在高裂缝密度地层二阶模型的应用效果明显优于一阶模型，说明了在高裂缝密度储层考虑裂缝间的相互作用的必要性。     

A Factor-GARCH Model for High Dimensional Volatilities

Acta Mathematicae Applicatae Sinica, English Series - This paper proposes a method for modelling volatilities (conditional covariance matrices) of high dimensional dynamic data. We combine the...     

加强型Bi-2212超导股线有限元拉伸性能分析

为探究加强型Bi-2212超导股线的力学性能以及不锈钢包带对超导股线力学性能的影响，运用Ansys软件建立加强型Bi-2212超导股线的三维模型，采用有限元分析方法，对其机械结构进行仿真，模拟高温高压热处理后轴向受拉形变量和应力应变分布情况。仿真结果显示，在同样施加100 N拉力的情况下，与超导原线（Bi-2212超导线）相比，密绕Ni₈₀Cr₂₀包带后的加强型Bi-2212超导股线轴向受拉形变程度减小，约10%;应力应变均降低，约30%。采用Ni₈₀Cr₂₀作为外包带制成的加强型Bi-2212超导股线力学性能显著，是未来超导线发展方向之一。     

Selective Decrosslinking in Liquid Crystal Polymer Actuators for Optical Reconfiguration of Origami and Light‐Fueled Locomotion

The ability to optically reconfigure an existing actuator of a liquid crystal polymer network (LCN) so that it can display a new actuation behavior or function is highly desired in developing materials for soft robotics applications. Demonstrated here is a powerful approach relying on selective polymer chain decrosslinking in a LCN actuator with uniaxial LC alignment. Using an anthracene‐containing LCN, spatially controlled optical decrosslinking can be realized through photocleavage of anthracene dimers under 254 nm UV light, which alters the distribution of actuation (crosslinked) and non‐actuation (decrosslinked) domains and thus determines the actuation behavior upon order‐disorder phase transitions. Based on this mechanism, a single actuator having a flat shape can be reconfigured in an on‐demand manner to exhibit reversible shape transformation such as self‐folding into origami three‐dimensional structures. Moreover, using a dye‐doped LCN actuator, a light‐fueled microwalker can be optically reconfigured to adopt different locomotion behaviors, changing from moving in the laser scanning direction to moving in the opposite direction.     

梁柱简化模型在自立塔塔线体系动态响应中的适用性研究

对输电塔进行合理简化可以提高塔线体系动力学仿真的效率。本文给出自立塔梁柱简化模型的计算方法，并提出利用梁柱简化模型计算方法建立自立塔塔线体系整体模型，同时采用桁梁混合模型建立精细化塔线体系整体模型，对两种模型塔线体系静力特性及振型和固有频率等动力特性进行对比分析。以脱冰工况为例，采用生死单元技术将施加在输电线节点上的集中质量单元杀死来模拟脱冰，实现对塔线体系动力学响应的有限元模拟，研究塔线体系简化模型在动态响应中的适用性。结果表明，两种模型弯曲变形误差小，低阶的振型相同，固有频率值误差小，动力特性基本相同；脱冰工况下，自立塔节点位移和塔材内力时程曲线一致，在提高计算效率的情况下，能有效保证计算精度。     

Interfacial Synthesis of a Monolayered Fluorescent Two-Dimensional Polymer through Dynamic Imine Chemistry

A fluorescent monolayered two-dimensional polymer (2DP) containing both tetraphenylethylene (TPE) and imine linkages is synthesized at air-water interface using the Langmuir-Blodgett method. We designed TPE-based monomers with long distances between the TPE and the imine linkages to avoid the charge transfer and therefore keep the fluorescence. A monolayered 2DP provided with more than 104 μm² in domain size and around 0.8 nm thickness was obtained through a successive Schiff base reaction at air-water interface. The nanostructures and fluorescent property of 2DP films were characterized by optical microscopy, SEM, TEM, AFM and fluorescence spectrum. Most importantly, the tip-enhanced Raman spectroscopy (TERS) was utilized here to confirm the success of the polycondensation of monolayered 2DP.     

Palladium-Catalyzed Electrophilic Functionalization of Pyridine Derivatives through Phosphonium Salts

Herein, we report a highly efficient and practical method for pyridine-derived heterobiaryl synthesis through palladium-catalyzed electrophilic functionalization of easily available pyridine-derived quaternary phosphonium salts. The nice generality of this reaction was goes beyond arylation, enabling facile incorporation of diverse carbon-based fragments, including alkenyl, alkynyl, and also allyl fragments, onto the pyridine core. Notably, the silver salt additive is revealed to be of vital importance for the success of this transformation and its pivotal role as transmetallation mediator, which guarantees a smooth transfer of pyridyl group to palladium intermediate, is also described.